delay_basic.h

Go to the documentation of this file.

/* Copyright (c) 2002, Marek Michalkiewicz
   Copyright (c) 2007 Joerg Wunsch
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:

   * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

   * Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in
     the documentation and/or other materials provided with the
     distribution.

   * Neither the name of the copyright holders nor the names of
     contributors may be used to endorse or promote products derived
     from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  POSSIBILITY OF SUCH DAMAGE. */

/* $Id: delay_basic.h 2143 2010-06-08 21:19:51Z joerg_wunsch $ */

#ifndef _UTIL_DELAY_BASIC_H_
#define _UTIL_DELAY_BASIC_H_ 1

#include <inttypes.h>

#if !defined(__DOXYGEN__)
static inline void _delay_loop_1(uint8_t __count) __attribute__((always_inline));
static inline void _delay_loop_2(uint16_t __count) __attribute__((always_inline));
#endif

/** \file */
/** \defgroup util_delay_basic <util/delay_basic.h>: Basic busy-wait delay loops
    \code
    #include <util/delay_basic.h>
    \endcode

    The functions in this header file implement simple delay loops
    that perform a busy-waiting.  They are typically used to
    facilitate short delays in the program execution.  They are
    implemented as count-down loops with a well-known CPU cycle
    count per loop iteration.  As such, no other processing can
    occur simultaneously.  It should be kept in mind that the
    functions described here do not disable interrupts.

    In general, for long delays, the use of hardware timers is
    much preferrable, as they free the CPU, and allow for
    concurrent processing of other events while the timer is
    running.  However, in particular for very short delays, the
    overhead of setting up a hardware timer is too much compared
    to the overall delay time.

    Two inline functions are provided for the actual delay algorithms.

*/

/** \ingroup util_delay_basic

    Delay loop using an 8-bit counter \c __count, so up to 256
    iterations are possible.  (The value 256 would have to be passed
    as 0.)  The loop executes three CPU cycles per iteration, not
    including the overhead the compiler needs to setup the counter
    register.

    Thus, at a CPU speed of 1 MHz, delays of up to 768 microseconds
    can be achieved.
*/
void
_delay_loop_1(uint8_t __count)
{
        __asm__ volatile (
                "1: dec %0" "\n\t"
                "brne 1b"
                : "=r" (__count)
                : "0" (__count)
        );
}

/** \ingroup util_delay_basic

    Delay loop using a 16-bit counter \c __count, so up to 65536
    iterations are possible.  (The value 65536 would have to be
    passed as 0.)  The loop executes four CPU cycles per iteration,
    not including the overhead the compiler requires to setup the
    counter register pair.

    Thus, at a CPU speed of 1 MHz, delays of up to about 262.1
    milliseconds can be achieved.
 */
void
_delay_loop_2(uint16_t __count)
{
        __asm__ volatile (
                "1: sbiw %0,1" "\n\t"
                "brne 1b"
                : "=w" (__count)
                : "0" (__count)
        );
}

#endif /* _UTIL_DELAY_BASIC_H_ */