<avr/power.h>: Power Reduction Management

#include <avr/power.h>

Many AVRs contain a Power Reduction Register (PRR) or Registers (PRRx) that allow you to reduce power consumption by disabling or enabling various on-board peripherals as needed. Some devices have the XTAL Divide Control Register (XDIV) which offer similar functionality as System Clock Prescale Register (CLKPR).

There are many macros in this header file that provide an easy interface to enable or disable on-board peripherals to reduce power. See the table below.

Note

Not all AVR devices have a Power Reduction Register (for example the ATmega8). On those devices without a Power Reduction Register, the power reduction macros are not available..

Not all AVR devices contain the same peripherals (for example, the LCD interface), or they will be named differently (for example, USART and USART0). Please consult your device's datasheet, or the header file, to find out which macros are applicable to your device.

For device using the XTAL Divide Control Register (XDIV), when prescaler is used, Timer/Counter0 can only be used in asynchronous mode. Keep in mind that Timer/Counter0 source shall be less than ¼th of peripheral clock. Therefore, when using a typical 32.768 kHz crystal, one shall not scale the clock below 131.072 kHz.

Power Macro	Description	Applicable for device
power_aca_disable()	Disable the Analog Comparator on PortA.	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_aca_enable()	Enable the Analog Comparator on PortA.	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_adc_enable()	Enable the Analog to Digital Converter module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_adc_disable()	Disable the Analog to Digital Converter module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_adca_disable()	Disable the Analog to Digital Converter module on PortA	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_adca_enable()	Enable the Analog to Digital Converter module on PortA	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_evsys_disable()	Disable the EVSYS module	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_evsys_enable()	Enable the EVSYS module	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_hiresc_disable()	Disable the HIRES module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_hiresc_enable()	Enable the HIRES module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_lcd_enable()	Enable the LCD module.	ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega649, ATmega6490, ATxmega64B1, ATxmega64B3, ATxmega128B3
power_lcd_disable().	Disable the LCD module.	ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega649, ATmega6490, ATxmega64B1, ATxmega128B1, ATxmega64B3, ATxmega128B3
power_pga_enable()	Enable the Programmable Gain Amplifier module.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_pga_disable()	Disable the Programmable Gain Amplifier module.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_pscr_enable()	Enable the Reduced Power Stage Controller module.	AT90PWM81
power_pscr_disable()	Disable the Reduced Power Stage Controller module.	AT90PWM81
power_psc0_enable()	Enable the Power Stage Controller 0 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_psc0_disable()	Disable the Power Stage Controller 0 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_psc1_enable()	Enable the Power Stage Controller 1 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_psc1_disable()	Disable the Power Stage Controller 1 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_psc2_enable()	Enable the Power Stage Controller 2 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM81
power_psc2_disable()	Disable the Power Stage Controller 2 module.	AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM81
power_ram0_enable()	Enable the SRAM block 0 .	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram0_disable()	Disable the SRAM block 0.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram1_enable()	Enable the SRAM block 1 .	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram1_disable()	Disable the SRAM block 1.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram2_enable()	Enable the SRAM block 2 .	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram2_disable()	Disable the SRAM block 2.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram3_enable()	Enable the SRAM block 3 .	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_ram3_disable()	Disable the SRAM block 3.	ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_rtc_disable()	Disable the RTC module	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_rtc_enable()	Enable the RTC module	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_spi_enable()	Enable the Serial Peripheral Interface module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_spi_disable()	Disable the Serial Peripheral Interface module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_spic_disable()	Disable the SPI module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_spic_enable()	Enable the SPI module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_spid_disable()	Disable the SPI module on PortD	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_spid_enable()	Enable the SPI module on PortD	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0c_disable()	Disable the TC0 module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0c_enable()	Enable the TC0 module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0d_disable()	Disable the TC0 module on PortD	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0d_enable()	Enable the TC0 module on PortD	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0e_disable()	Disable the TC0 module on PortE	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0e_enable()	Enable the TC0 module on PortE	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0f_disable()	Disable the TC0 module on PortF	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc0f_enable()	Enable the TC0 module on PortF	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc1c_disable()	Disable the TC1 module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_tc1c_enable()	Enable the TC1 module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_twic_disable()	Disable the Two Wire Interface module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_twic_enable()	Enable the Two Wire Interface module on PortC	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_twie_disable()	Disable the Two Wire Interface module on PortE	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_twie_enable()	Enable the Two Wire Interface module on PortE	ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3
power_timer0_enable()	Enable the Timer 0 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM216, AT90PWM316, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega3250, ATmega3250A, ATmega645, ATmega6450, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_timer0_disable()	Disable the Timer 0 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega3250, ATmega3250A, ATmega645, ATmega6450, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_timer1_enable()	Enable the Timer 1 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_timer1_disable()	Disable the Timer 1 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, AT90PWM81, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_timer2_enable()	Enable the Timer 2 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer2_disable()	Disable the Timer 2 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer3_enable()	Enable the Timer 3 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer3_disable()	Disable the Timer 3 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer4_enable()	Enable the Timer 4 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer4_disable()	Disable the Timer 4 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer5_enable()	Enable the Timer 5 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_timer5_disable()	Disable the Timer 5 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2
power_twi_enable()	Enable the Two Wire Interface module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_twi_disable()	Disable the Two Wire Interface module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_usart_enable()	Enable the USART module.	AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_usart_disable()	Disable the USART module.	AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B
power_usart0_enable()	Enable the USART 0 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_usart0_disable()	Disable the USART 0 module.	ATmega640, ATmega1280, ATmega1281, ATmega1284, ATmega128RFA1, ATmega2560, ATmega2561, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega48, ATmega88, ATmega168, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_usart1_enable()	Enable the USART 1 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_usart1_disable()	Disable the USART 1 module.	ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATmega164P, ATmega324P, ATmega644, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega16A4U, ATxmega32A4U
power_usart2_enable()	Enable the USART 2 module.	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usart2_disable()	Disable the USART 2 module.	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usart3_enable()	Enable the USART 3 module.	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usart3_disable()	Disable the USART 3 module.	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartc0_disable()	Disable the USART0 module on PortC	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartc0_enable()	Enable the USART0 module on PortC	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartd0_disable()	Disable the USART0 module on PortD	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartd0_enable()	Enable the USART0 module on PortD	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usarte0_disable()	Disable the USART0 module on PortE	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usarte0_enable()	Enable the USART0 module on PortE	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartf0_disable()	Disable the USART0 module on PortF	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usartf0_enable()	Enable the USART0 module on PortF	ATmega640, ATmega1280, ATmega1281, ATmega2560, ATmega2561
power_usb_enable()	Enable the USB module.	AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATxmega64B1, ATxmega128B1, ATxmega64B3, ATxmega128B3, ATxmega16A4U, ATxmega32A4U, ATxmega128c3, ATxmega256c3, ATxmega16c4, ATxmega32c4
power_usb_disable()	Disable the USB module.	AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, ATxmega64B1, ATxmega128B1, ATxmega64B3, ATxmega128B3, ATxmega16A4U, ATxmega32A4U,ATxmega128c3, ATxmega256c3, ATxmega16c4, ATxmega32c4
power_usi_enable()	Enable the Universal Serial Interface module.	ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861
power_usi_disable()	Disable the Universal Serial Interface module.	ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861
power_vadc_enable()	Enable the Voltage ADC module.	ATmega406
power_vadc_disable()	Disable the Voltage ADC module.	ATmega406
power_all_enable()	Enable all modules.	ATxmega6A4, ATxmega32A4, ATxmega64A1, ATxmega64A1U, ATxmega64A3, ATxmegaA1, ATxmegaA1U, ATxmega128A3, ATxmega192A3, ATxmega256A3, ATxmegaA3B, ATxmega16D4, ATxmega32D4, ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3, ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega64B1, ATxmega128B1, ATxmega64B3, ATxmega128B3, ATxmega16A4U, ATxmega32A4U, ATxmega64A3U, ATxmega128A3U, ATxmega192A3U, ATxmega256A3U
power_all_disable()	Disable all modules.	ATxmega6A4, ATxmega32A4, ATxmega64A1, ATxmega64A1U, ATxmega64A3, ATxmegaA1, ATxmegaA1U, ATxmega128A3, ATxmega192A3, ATxmega256A3, ATxmegaA3B, ATxmega16D4, ATxmega32D4, ATxmega64D3, ATxmega128D3, ATxmega192D3, ATxmega256D3, ATmega640, ATmega1280, ATmega1281, ATmega128RFA1, ATmega2560, ATmega2561, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287, AT90PWM1, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90PWM216, AT90PWM316, ATmega165, ATmega165P, ATmega325, ATmega325A, ATmega325PA, ATmega3250, ATmega3250A, ATmega3250PA, ATmega645, ATmega6450, ATmega169, ATmega169P, ATmega329, ATmega329A, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649, ATmega6490, ATmega164P, ATmega324P, ATmega644, ATmega406, ATmega48, ATmega88, ATmega168, ATtiny24, ATtiny44, ATtiny84, ATtiny84A, ATtiny25, ATtiny45, ATtiny85, ATtiny261, ATtiny461, ATtiny861, ATmega256RFR2, ATmega2564RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega64RFR2, ATmega644RFR2, ATxmega64B1, ATxmega128B1, ATxmega64B3, ATxmega128B3, ATxmega16A4U, ATxmega32A4U, ATxmega64A3U, ATxmega128A3U, ATxmega192A3U, ATxmega256A3U

Some of the newer AVRs contain a System Clock Prescale Register (CLKPR) that allows you to decrease the system clock frequency and the power consumption when the need for processing power is low. On some earlier AVRs (ATmega103, ATmega64, ATmega128), similar functionality can be achieved through the XTAL Divide Control Register. Below are two macros and an enumerated type that can be used to interface to the Clock Prescale Register or XTAL Divide Control Register.

Note

Not all AVR devices have a clock prescaler. On those devices without a Clock Prescale Register or XTAL Divide Control Register, these macros are not available.

typedef enum
{
    clock_div_1 = 0,
    clock_div_2 = 1,
    clock_div_4 = 2,
    clock_div_8 = 3,
    clock_div_16 = 4,
    clock_div_32 = 5,
    clock_div_64 = 6,
    clock_div_128 = 7,
    clock_div_256 = 8,
    clock_div_1_rc = 15, // ATmega128RFA1 only
} clock_div_t;

Clock prescaler setting enumerations for device using System Clock Prescale Register.

typedef enum
{
    clock_div_1 = 1,
    clock_div_2 = 2,
    clock_div_4 = 4,
    clock_div_8 = 8,
    clock_div_16 = 16,
    clock_div_32 = 32,
    clock_div_64 = 64,
    clock_div_128 = 128
} clock_div_t;

Clock prescaler setting enumerations for device using XTAL Divide Control Register.

clock_prescale_set(x) 

Set the clock prescaler register select bits, selecting a system clock division setting. This function is inlined, even if compiler optimizations are disabled.

The type of x is clock_div_t.

Note

For device with XTAL Divide Control Register (XDIV), x can actually range from 1 to 129. Thus, one does not need to use clock_div_t type as argument.

clock_prescale_get() 

Gets and returns the clock prescaler register setting. The return type is clock_div_t.

Note

For device with XTAL Divide Control Register (XDIV), return can actually range from 1 to 129. Care should be taken has the return value could differ from the typedef enum clock_div_t. This should only happen if clock_prescale_set was previously called with a value other than those defined by clock_div_t.